Command X-Large Hook
1 package
On This Page
Directions
Prep: Do not hang frames on hooks. Wait 7 days after painting before use. Wipe wall with rubbing alcohol. Do not use household cleaners or water. Apply: 1. Separate strips. 2. Remove red liners. Press two strips to the mounting base. 3. Remove black liners. Press to wall for 10 seconds. Complete steps 4-6. Critical steps to ensure hold: 4. Temporarily remove hook from wall to reinforce strips. Slide hook up and off base. 5. Press base very hard with your palm on the top and bottom areas for 30 seconds each. 6. Slide hook back on. Wait 1 hour for adhesive to build. Remove: 1 Slide hook up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Stretch the strip slowly against the surface at least 15 inches (38 cm) to release. Hook can be reused with command large replacement strips.
Product Details
10 lb 4.5 kg. Damage-free hanging. Limited Warranty/Limitation of Liability (USA): Product will be free from manufacturing defects. If defective, 3M will replace or refund at 3M's option. 3M will not be liable for any loss or damage, whether direct, indirect, incidental or consequential. command.com/howtouse. See installation video at command.com/howtouse. 1-800-934-73355. Made in USA with globally sourced materials.Nutrition Facts
Warnings
Caution: Failure to follow instructions may result in damage or injury. Do not hang valuable items. Do not hang over beds or on wallpaper. Use indoors, in a temperature-controlled space.Manufacturer
3M
St. Paul, MN 55144
UPC
00068060463494