Bell Standard Valve 20 Inch Self Sealing Tube

1 tube


 

Directions

See side panel for how to replace a tube. How to replace a tube: requires two tire levers. 1. Remove wheel from bike. Use thin end of tire lever to pry tire from rim. Insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Reach in between the rim and tire and remove tube. Check inside of tire for sharp objects and remove them. 3. Slightly inflate tube, just enough to give it some shape. Insert new tube valve through valve hole in wheel. 4. Use hand to reset tire back on wheel. Pry last part of tire onto rim with tire levers if needed. Be careful not to pinch the tube between the tire and rim! 5. Inflate tire about half way then check to make sure it is correctly seated all the way around the rim. Inflate to recommended PSI on tire sidewall.

 

Product Details

Fits tire widths: 1.75" - 2.25". Includes: one tube. Self sealing tube. Stops flats. Works with these bikes: Kids, BMX, Mountain. See side panel for how to replace a tube. Standard valve. Liquid sealant inside tube flows to seal most holes up to 1/8 inch instantly while you ride. Tube sealant will not freeze or dry out. Seals punctures as they happen. www.thebellgarage.com. 1-800-456-BELL. Made in China.

Nutrition Facts

Warnings

Warning: All inflatable tubes subject to deflation from mis installation and certain hazards. Deflation can lead to loss of control of bike and injury or death. Read important instructions before installing any sealant tube.

Manufacturer

Bell Sports, Inc.
1001 Innovation Road Rantoul, IL 61866 United States

UPC

00035011901305