Bell Inner Tube, Bicycle
1 tube
On This Page
Directions
How To Replace Tube: Requires two tire levers. 1. Remove wheel from bike; use thin end of tire lever to pry tire from rim; insert 2nd lever 3 spokes away. Move levers in opposite direction. 2. Reach in between the rim and tire and remove tube; check inside of tire for sharp objects and remove them. 3. Slightly inflate tube, just enough to give it some shape; insert new tube valve hole in wheel. 4. Use hand to reset tire back on wheel; pry last part of tire onto rim with tire levers if needed. Be careful not to pinch the tube between the tire and rim! 5. Inflate tire about half way then check to make sure it is correctly seated all the way around the rim; inflate to recommended PSI on tire sidewall.
Product Details
27.5 inch (48.26 mm - 53.98 mm). Includes: one tube. The original. Standard valve. Made in China.Nutrition Facts
Warnings
All inflatable tubes subject to deflation from mis-installation and certain hazards. Deflation can lead to loss of control of bike and injury or death. Read important instructions before installing.Manufacturer
BELL SPORTS
1001 Innovation Road Rantoul, IL 61866 USA
UPC
00035011948980