Bell Lumina 900 USB Rechargeable Light Set

1 set


 

Directions

Headlight: Installation: 1. Place on handlebar. 2. Wrap silicone strap around bar as tightly as possible. 3. Latch to hook. Charging: 1. Pop off the rubber casing, exposing the USB tab. 2. Plug directly into USB port. A red light will flash while charging and flashes green when fully charged. (no cable needed). 3. Reinstall cap securely after charging. Note: Charge fully before first use. Installation Tail Light: 1. With silicone strap attached to one hook, place light on seatpost at desired position. 2. Wrap silicon strap around seatpost and hook in place. Charging: 1. Pop off the rubber casing, exposing the USB tab. 2. Plug directly into USB port. A red light will flash while charging and turn solid red when fully charged. (no cable needed). 3. Reinstall cap securely after charging. Note: Charge fully before first use.

 

Product Details

Includes: one (1) headlight, one (1) tail light, two (2) li-poly batteries, mounting straps. See and be seen. Fuel Gauge: Green =100-75% charged, orange = 75-25%, red = less than 25%. Tested to FL-1 Standards. Headlight: 300 lumens, 3 modes, 2.5 hrs - steady low, 1 hr hrs - steady high, 5.5 hrs - strobe, 157' beam distance. Tail light: 20 lumens, 3 modes, 1.25 hrs - steady, 5.25 hrs - flash, 4.25 hrs - strobe. For warranty details: www.Thebellgarage.com. CE listed. RoHS compliant. Li-poly batteries. www.thebellgarage.com. 1-800-456-BELL. Made in China.

Nutrition Facts

Warnings

Electrical waste, do not dispose of in trash. FCC Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Shielded interface cable must be used with the equipment in order to compy with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.

Manufacturer

Bell Sports, Inc.
1001 Innovation Road Rantoul, IL 61866 United States

UPC

00035011983271