As Seen On TV Indoor & Outdoor Mighty Light Motion & Light Sensor Activated White
On This Page
Directions
Mounting your mighty light Option 1. 1. Insert screw into wall with head of screw protruding approximately .25 inches. If you are installing it on a very hard surface, you may need to pre-drill a hole for the screw. The enclosed screw anchor can be used for drywall, cement, brick or similar surfaces. 2. Slide Mighty Light onto screw. Option 2. 1. Peel and stick adhesive to back of mounting plate. 2. Attach second adhesive to desired wall location and press. Use caution using and removing all adhesives on wall surfaces as some could damage wall surface. 3. Attach and hang Mighty Light. Operating your mighty light 1. Install the battery (see battery installation section). 2. Choose a location (see location section). 3. Mount the light (see mounting section), or simply stand the unit on any flat surface 4. Built-in motion sensor automatically turns on the light when movement is detected in the area. The light remains on as long as motion continues to be detected. Please note that there is no On/Off switch, the light can only be activated by motion. 5. Built-in photosensor allows the light to only be turned on at night or in darkness, conserving energy. Specifications Batteries Required: 9 Volt Alkaline. Wattage: Maximum: 0.225W, Static: 0.45mW. Voltage: 9V Light Duration: approximately 30 seconds from last motion detected. Weatherproof Rating: IP44. Battery installation 1. To open battery compartment, pull tab on back where indicated. Your Mighty Light uses a 9 volt battery. The batteries typically last 6 months to 1 year under normal use. Note: If your Mighty Light does not turn on after battery installation: Make sure fresh batteries have been inserted matching the correct +/- polarity orientation and are making secure contact with the terminals.
Description
As seen on TV Indoor & Outdoor Mighty Light Motion & Light Sensor Activated White. Automatic! Turns on when motion is detected. Built-in photo sensor detects darkness. LED can last up to 30,000 hours Weather resistant. Requires 9 volt battery not included No wiring required. Easy peel/stick or screw installation.Other Description
Runs on a 9 volt battery (not included). Toolbox & cabinets. Entrance ways. Night light for kids. Walkways & patios. Perfect indoors hallways, closets, cabinets, bedrooms, basement, garage, bathrooms, stairways, office, electrical box. And outdoors entryways, porches, sheds, walkways, steps, trunk of car. An easy-to-use, energy efficient, environmentally friendly, multi-purpose light. It uses the best quality LED lighting and motion sensor technology that detects darkness and motion. This LED light consumes only 1 watt of power and can last up to 30,000 hours (more than 10 years at the rate of 8 hours of usage per day). Hands free motion activated indoor/outdoor light. Two mounting options: Peel & stick or screw. Mighty light requires no wiring runs on a 9 volt battery (not included). Mighty Light: Light where you need it most! Your Mighty Light will guide you every step of the way. Perfect for both indoor and outdoor use. Place your Mighty Light outdoors by the entrance door, and you won't fumble for your keys or the lock anymore. Place it indoors and you no longer have to enter your house in the dark. Use it outdoors for steps, doors, walkways, porches, gates, sheds, decks and more. Use it indoors for hallways, bathrooms, steps, and any other dark spaces you can imagine, The two brilliant LEDs will light your way, preventing you from falling down the stairs or tripping over objects. Great for lighting up dark areas. Totally portable and needs no wiring. Uses a 9 volt battery (not included), which will last 6-12 months depending on usage. Location: The selected location should not be near light sources, such as street or porch lighting, as these may cause the Mighty Light to turn off automatically. The Mighty Light should also be installed away from heaters, air conditioners, barbecues, vents, and large reflective surfaces such as swimming pools and jacuzzis, and white walls. To avoid damage to some components, do not aim the motion sensor towards the sun. At night, the LED lights will remain on for about 25-30 seconds after the last detected movement. If a movement is detected while the lights are on, the light duration will be reset and remain on for about another 25-30 seconds. 90 day limited warranty. This Motion-Activated Light is warranted against faulty material and/or workmanship for a period of 90 days from date of original purchase. The obligation of the manufacturer, under this warranty, is limited to servicing and replacing defective parts when the unit is returned to Harvest Direct, freight pre-paid during the warranty period. To obtain warranty repair, the purchase receipt should be returned with the product. This warranty becomes void on any unit which has been tampered with, damaged by accident, or damaged otherwise by improper operation. This guarantee is in addition to any guarantees implied by state or federal legislation. www.harvestdirect.com.Distributor
Harvest Direct61 Accord Park Drive Norwell, MA 02061
www.harvestdirect.com
UPC
00682676002375