Brita Bottle Water Filtration System Nickelodeon


 

Directions

Rinse filter under running water for 15 seconds to activate. Insert filter into straw then fill, sip & enjoy. Replace filter every 341 refills, 2 months or 40 gallons.† (1 bottle = 15 oz.). †Filter replacement is essential for product to perform as represented. Getting started: 1. Hand-wash bottle, cap and straw with mild dish soap. Rinse well. 2. Important: rinse filter under running water for 15 seconds. 3. Drop in filter and press down firmly until filter is flush with top of straw. 4. Align lid and straw in unlocked position, and rotate straw to lock. 5. Fill bottle with water, screw on lid firmly, then sip and enjoy. Replace filter every 2 months or 40 gallons. Cleaning instructions: Remove the filter before cleaning your Brita Bottle® water filtration system. All plastic components (bottle, cap, straw and mouthpiece) can be washed in the dishwasher (top rack only) or by hand with a mild dish soap. For best results: Hand-wash cap and mouthpiece periodically with a mild dish soap. Rinse well. Storage instructions: Empty water from your Brita Bottle® water filtration system before storing, and loosen cap from the bottle to prevent odors. After periods of nonuse or as required, wash bottle, cap, straw and mouthpiece with warm water and mild dish soap. Rinse well. Do not wash filter. Fresh filter = fresher water: Change your filter every 2 months for great-tasting water! Filter replacement is essential for product to perform as represented. The Brita Bottle® filter processes up to 40 gallons of tap water. The Brita Bottle® water filtration system is intended to be used with a Brita Bottle® filter inside. Do not use hot water (max. temp. 85 degrees F/29 degrees C min. temp. 34 degrees F/1 degrees C). Do not freeze bottle or filter. Adults should help younger children with opening/dosing spout and filter replacement.

 

Description

Brita® Bottle Water Filtration System Nickelodeon. Filter inside. Hard sided. Makes Tap Water Taste Great Anywhere™. 1 filter can replace 300 water bottles*. ADA accepted, American Dental Association®. *Standard 16.9 oz. bottles. ©2013 Viacom International Inc.

Other Description

The Brita Bottle™ water filtration system has been tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and particulate reduction (class VI). Independently Certified NSF®. Brita® filters keep a healthy level of fluoride, a water additive that promotes strong teeth (applies to fluoridated tap water). Substances reduced by this water treatment device are not necessarily in all users* water. Use with potable water only. Model number: BB07. Consumer assistance: to stay on top of important water news and new products from Brita, visit www.brita.com. Call 1-800-24-BRITA. BPA free. Reduces chlorine (taste and odor). Dishwasher safe (top rack only). The ADA Council on scientific affairs* acceptance of Brita Bottle™ water filtration system is based on its finding that the product is an effective water filter that does not remove fluoride from tap water. The ADA endorses community water fluoridation as a safe, beneficial, and cost effective public health measure for preventing tooth decay. Brita Bottle®. Water filtration system. System model no. BB07. Replacement filter model no. BB06. Tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of the claims specified on the performance data sheet. Chemical and mechanical reduction unit. NSF®. This system has been tested according to NSF/ANSI 42 for reduction of the substances listed. The concentration of each of the indicated substances in water entering the systems was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42. Testing was performed under standard laboratory conditions at a flow rate of 0.20 gallons/minute. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in all users' water. Filter performance may vary based on local water conditions. Please refer elsewhere in this User's Guide for the proper conditioning and use and care requirements. Maintenance according to the manufacturer's instructions is essential for proper filter performance. Replace the Brita Bottle® filter every 40 gallons/151 liters. The Brita Bottle® water filtration system has been tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and particulate reduction (class VI). Consumer assistance: To stay on top of important water news and new products from Brita, and to locate retailers, visit www.brita.com or call 1-800-24-BRITA (1-800-242-7482). ©2013 Viacom International Inc.

Warnings

Not for children under 3 years.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Max. temp. 29 degrees C/85 degrees F. no warranty is made for use with water at higher temperatures.
The Brita Bottle® filter is not intended to purify water. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Individuals requiring water of special microbiological purity should follow the advice of their doctor or local health officials regarding the use and consumption of their tap water and Brita® filtered water. Substances reduced by this water treatment device are not necessarily in all users' water.

Distributor

Brita LP
1221 Broadway, Oakland, CA 94612
1-800-24-BRITA
www.brita.com

UPC

00060258358827