Schwinn Bike Seat, Commute
1 bike seat
On This Page
Directions
Post bracket assembly: A. Post bracket. B. Center bolt. C. (inner rail brackets. D. Outer rail brackets. E. Nuts. F. Press stop tab. Installation: 1. Check to see that the nuts (e) are hand tight. 2. Line the post bracket (a) up with the seatpost (make sure the press stop tab (f) is facing the underside of the seat). Press the bracket onto the seatpost until it stops. 3. Slide the seat forward and backward (seat rails slide inside rail brackets) to adjust the distance required to reach the handlebars. Note: the elbows should have a slight bend. 4. Tilt the seat by pulling up and/or pushing down on the front of the seat. 5. Tighten nuts (e) with a wrench. 6. Make sure all fasteners are tight before riding. Includes: bike seat and seatpost clamp tools required: 14 mm or adjustable wrench.
Product Details
Riding position:- forward sport; moderate commute; upright cruise. Riding position & style: forward style: standard width for sport and road performance. Moderate commute: mid-width great for urban and commuter use. Upright cruise: extra wide for upright and casual cruising. Weather-resistant cover: soft PU cover material offers comfortable riding and weather-resistant protection. www.schwinnbikes.com. Facebook. Twitter. YouTube. Instagram. 1-800-515-0074/customerservice(at)pacific-cycle.com. Reduce, reuse, recycle, repeat. Made in China.Nutrition Facts
Manufacturer
Pacific Cycle, Inc.
4902 Hammersley Road Madison, WI 53711 USA
UPC
00038675238626