Johnsen's Battery Cleaner, with Acid Indicators
10 oz (284 g)
On This Page
Directions
Directions: 1. Shake well before use. 2. Remove battery terminals from post on battery. 3. Spray terminals, post, and any area where corrosion is seen. (Product will foam while neutralizing acid). 4. Wait 3-5 minutes to allow product to fully neutralize acid. 5. Re-apply, if necessary. 6. Rinse with water. (Do not allow product to splash onto other surfaces). 7. Allow to air dry. Replace terminals. (For a complete maintenance service on battery, use Johnsen's Battery Terminal Protector, Part No 4605).
Product Details
Indicator changes from yellow to pink upon acid contact. Removes corrosion. Reduces voltage leaks. Neutralizes acid spills. Johnsen's Battery Cleaner is a quick acting, quick neutralizing, penetrating cleaner that dissolves corrosion and neutralizes acid. Can be safely sprayed onto battery. If battery case is damaged, do not apply product. Visit us (at)technicalchemical.com. 1-800-527-0885. Disposal: All used and unused product must be disposed of in accordance with federal, state and local regulations. Made in the U.S.A.Nutrition Facts
Warnings
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.,Warning: Eye irritant. Vapor harmful. Contents under pressure. Read warnings on side panel. Waning: Contents under pressure. Keep away from heat, sparks, or open flames. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F. Keep out of reach of children. Use with adequate ventiliation. Avoid prolonged breathing of vapor. If product comes in contact with eyes, flush with water for 15 minutes and consult physician. If contact with skin occurs, wash with warm water and soap. Do not take internally. If ingested, call a physician immediately.Manufacturer
Technical Chemical Company
Cleburne, TX 76033 United States
UPC
00039101046068