Farberware Professional Digital Timer
On This Page
Directions
Instructions for use. Setting the clock: 1. Press "start" button and hold it (5 seconds) until the whole display flashes. 2. Press "hour" button to set desired hour. 3. Press "minute" button to set desired minutes. 4. Press "start" button to start clock. Setting the timer: 1. Press "stop" button once to reset display. 2. Press "hour" button to set desired hour. 3. Press "minute" button to set desired minutes. 4. Press "start" button to start clock. Notes: The timer must be set as a clock first. If you wish to suspend countdown, press "start" once. Press "start" again to resume. To cancel countdown, press "stop" once. To go back to clock mode, press "stop" and "start" simultaneously. The maximum countdown is 19 hours. Two pre-alarm signals are sounded at 10 minutes and 5 minutes before countdown reaches zero. When battery is replaced, timer automatically will beep one time and go into clock mode.
Description
Farberware® Professional Digital Timer. 100 years of excellence. Start. Hour. Min. Stop. Lifetime limited warranty.Other Description
Long and loud ring. Easy-to-set buttons. Includes battery. Lifetime limited warranty. This fine product is warranted to be free from defects in material and workmanship. Any piece found to be defective under normal use and care will be repaired or replaced at no charge with the same item or an item of equal or better value. Individual pieces should be returned postage prepaid to: Farberware Products, c/o Lifetime Brands, Inc., Customer Service Department, P.O. Box 9750, Trenton, NJ 08650-1750. You may have other rights, which vary from state to state. Residents of the state of California please call 1-800-252-3390 for further instructions. Farberware® is a registered trademark of Farberware Licensing Company, LLC. Manufactured and sold pursuant to a license from Farberware Licensing Company, LLC. New. 1-800-999-2811. [email protected]. ©2011 Farberware Licensing Company, LLC. All rights reserved.UPC
00024131162703