Gorilla Super Glue Gel
On This Page
Directions
Shake well. Shake vigorously to mix ingredients, then shake gel into nozzle prior to use. 1. Protect work area from spills. 2. Clean and dry surfaces to be bonded. 3. With cap on bottle, shake product, then turn product upside down and tap on hard surface to shake gel into bottle nozzle. 4. Remove cap and apply a small amount of Gorilla super glue gel to one surface. Only one dab per sq. Inch recommended. Set time can vary based on amount of glue and type of surface glued. Excess glue can cause delayed or failed bond. 5. Press the two surfaces together for about 10-30 seconds. Wait 24 hours for full cure. After using, clean nozzle with a dry cloth and replace cap. Store in cool, dry place.
Description
Gorilla® Super Glue Gel. Incredibly strong. 15 gram bottle. No run, control gel. 10 seconds. Impact-Tough®. Bonds: plastic*, wood, metal, ceramic, rubber, leather, paper and more!Other Description
No run, control gel formula: Controlled application and great for use on vertical surfaces. Bonds: plastic*, wood, metal, ceramic, rubber, leather, paper and more! Anti-clog cap: keeps glue fresh use after use. Made in USA with imported materials. 1-800-966-3458. www.gorillatough.com. ©2015 The Gorilla Glue Company.Warnings
*Not recommended for use on polyethylene or polypropylene plastic.Combustible, eye irritant. Contains cyanoacrylate. Bonds skin instantly. Keep out of reach of children and animals. Rapid polymerization may occur upon contact with water or alkaline substance, generating heat. Avoid contact with eyes, skin, mucous membranes, and prolonged breathing of vapor. Use in well-ventilated area. In case of eye contact, flush with water for at least 15 minutes and seek immediate medical attention. If product is swallowed, immediately contact a physician. Do not induce vomiting. In case of skin contact, immediately wash skin with mild soap and water. For medical emergencies only, call 1-800-420-7186.
UPC
00052427760012