Loctite Go2 Self-Fusing Wrap
On This Page
Directions
How to use: 1. Unroll Got Wrap. Every 8 inches, there will be 3 holes marking the perforation. 2. Tear the wrap along the 3 holes. 3. Remove the wrap from the plastic film. 4. Stretch and wrap around repair allowing 2/3 overlap and finishing by overlapping end over itself.
Description
Loctite® Go2® Self-Fusing Wrap. New. Stretch & wrap. No sticky residue for the cleanest results. 1 in x 5.0 ft (2.5cm x 152.0cm).Other Description
Go2 Wrap is a self-fusing silicone wrap that does not contain any adhesive, making repairs and projects possible without a sticky residue upon removal. It is resistant to UV, oil, chemicals, water, and extreme conditions and temperatures. Now, Go2 Wrap is available in a clear formulation and perforations every 8 inches, making transparent results easier than ever. Typical applications: Home: electrical connections, audio and video cables and connectors. Sealing repairs (e.g. flexible heaters. Pipes, ducts. Hoses), wrapping tape (e.g. extension cord, tool handle wrapping, jacketing),"no residue" tape clamping. Automotive: emergency radiator hose repairs, harness wrapping, jumper cable grip/insulation, vibration protection for hoses & pipes. Temporary hose clamp applications. Marine: boat rigging wrap, saltwater-proof/underwater repair, marine exhaust repairs, power hook-up protective wrap, splintery boat rails, bus bar insulation, coolant line repairs, whipping rope ends, sailboat chafe protection. Henkel Corporation. 1-800-624-7767. www.loctiteproducts.com. ©Henkel Corporation. All rights reserved.UPC
00079340647008