3M Scotch-Brite Paint & Rust Stripper, Large Area, 4 Inch
1 disc
On This Page
Directions
Instructions: 1. Do not exceed 3500 rpm operating speed. 2. Fully insert into dint chuck and lighten securely. 3. Test in small area to determine best speed and pressure for job. 4. Start tool off the workpiece then immediately ease Stripper onto the work surface Either edge or face of Stripper can be used. 5. To change Stripper, wait until drill has completely stopped. Unplug tool. Do not set drill down until drill has stopped completely.
Product Details
101 mm. Fast removal, saves time. For use on wood, metal and fiberglass. Sand wood, plastic, fiberglass and painted surface. Remove paint, rust or scale from metal. Packaging made from 100% recycled paper and paperboard containing. At least 35% post-consumer waste. Made in USA with US and globally sourced materials.Nutrition Facts
Warnings
Always wear appropriate personal protective equipment (eye, skin and respiratory) and provide appropriate local exhaust (or dust capture) while using this product. Follow the manufacturer s safety instructions for each power tool used. Disconnect electrical power from each power tool before changing abrasive. Before use, inspect and clean power tool mount according to manufacturer's instructions (do not use mount it damaged. excessively worn or dirty). Do not use abrasives or pads with nicks, cuts, tears, or badly curled or cupped edges. Direct particles and sparks down and away from the lace and body. Keep young children, pets, bystanders, combustible and flammable materials away from the work area Sanding lead based paint is hazardous, seek professional advice. Do not exceed 3500 RPM operating speed. Do not use it wear causes sander to wobble.Manufacturer
3M
3M Center St. Paul, MN 55144-1000
UPC
00048011077710