3M Face Mask, Advanced Filtering
1 mask
On This Page
Directions
How to Use: 1. Open the face mask, then put t on so the foam and nose clip is across the bridge of nose. Ensure it covers the nose and chin. 2. Pull each side band behind the head and attach with hook too secure the position. 3. Press the nose clip toward your nose, then use to the shape of the nose. 4. To check for proper positioning then breathe out quickly. Check ands warm air leaking at the edges or at the nose position and if so, repeat steps 1-4 to reduce leakage. Remember: Always follow these instructions. It is important to secure the side bands using the hook and check for proper positioning when wearing. Storage Method: Room temperature (-4 degrees F - 86 degrees F, 80% RH). Before use, keep product in the original packaging. 5 years after manufacturing date.
Product Details
Adult sized disposal. Designed for comfort and breathability. Side bands with hook attachments. Filter media filters at least 95% of airborne particulate matter (Certification & Performance: Tested to ASTM F 3502-21, Standard Specification for Barrier Face Coverings, this single use barrier face covering/face mask has been shown to provide a level of sub-micron particulate filtration efficiency when used as instructed. Not a Niosh approved respirator. See performance classification table above). Filtration efficiency (Certification & Performance: Tested to ASTM F 3502-21, Standard Specification for Barrier Face Coverings, this single use barrier face covering/face mask has been shown to provide a level of sub-micron particulate filtration efficiency when used as instructed. Not a Niosh approved respirator. See performance classification table above) F2. Breathability (Certification & Performance: Tested to ASTM F 3502-21, Standard Specification for Barrier Face Coverings, this single use barrier face covering/face mask has been shown to provide a level of sub-micron particulate filtration efficiency when used as instructed. Not a Niosh approved respirator. See performance classification table above) B1. Performance & Comfort: 3M Advanced electrostatic filter media to capture airborne particles (Certification & Performance: Tested to ASTM F 3502-21, Standard Specification for Barrier Face Coverings, this single use barrier face covering/face mask has been shown to provide a level of sub-micron particulate filtration efficiency when used as instructed. Not a Niosh approved respirator. See performance classification table above). Smooth inner material feels soft on the skin. Adjust by attaching the side bands with hook. Performance Classifications: Filtration efficiency: Level 1 lower performance (F1), Level 2 higher performance (F2). Breathability: Level 1 lower performance (B1), Level 2 higher performance (B2). Product Name: 3M Advanced filtering face mask AFFM. ASTM F3502-21 standard for barrier face coverings. See insert for more information. ASTM F3502-21 standard for barrier face coverings. Not a NIOSH approved respirator. Not FDA cleared for use in health care settings. 3M.com. how2recycle.info. If you have questions, contact 3M at 1-800-537-2191. Made in Singapore.Nutrition Facts
Ingredients
Composition: Polypropylene (Non-Woven and Hook (Skin Contact Materials)), Polyurethane/Pet Bands (Skin Contact Materials), Aluminum, Polyurethane Foam.Warnings
Precautions for Use: Not intended for use in health care settings. Always follow all guidance from local health authorities. Inspect the barrier face cover/ mask before use. If damaged, dirty or difficult to breathe through, do not use and replace with a new one. Do not reuse, launder, clean or disinfect. Dispose of used product in an appropriate trash receptacle according to applicable regulations. Contains metal. Should not be worn during MRI procedures. Do not place on anyone who is unable to remove the barrier face cover/mask without assistance. Sub-micron particulate efficiency and airflow resistance do not account Tor leakage of air around the perimeter of the barrier face covering. Air leakage can significantly affect overall product filtration efficiency.,Warning: Meets ASTM F3502, specification for barrier face coverings. This product is primarily intended as a means of source control for minimizing the projection of expelled materials from the wearer's nose and mouth. Warning: This barrier face covering is not a medical face mask as defined in ASTM F2100, is not intended for use in medical procedures, and is not a respirator. Do not use without the hook. Must link the side bands with hook when wearing the face mask. Product is most effective when user is clean shaven. People with chronic respiratory, cardiac or other medical conditions that make breathing difficult should check with their health care provider before using this face mask. Product is not designed or intended for use by children. This product can only be used as a barrier face covering face mask. Barrier face coverings /face masks do not eliminate the inhalation of pollutants or contaminants in the air nor do they eliminate the risk of contracting infection, illness or disease. Misuse may result in sickness or death. For proper use and application, please read all information, including the User Instructions inside and on this package, or call 3M company 1-800-537-2191.Manufacturer
3M
2510 Conway Avenue, MN 55144 USA
UPC
00051131223783