Command Designer Hook, General Purpose, Large
1 hook
On This Page
Directions
Apply: 1. Clean surface with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove red liners. Press adhesive to hook. 3. Remove black liners. Press to wall for 10 seconds. 4. To ensure adhesive hold slide hook up and off. 5. Press base firmly for 30 seconds. 6. Slide hook back on. Wait 1 hour before use. Remove: 1. Slide hook on and off. 2. Gently hold mounting base in place. 3. Never pull strip towards you! 4. Stretch the strip slowly against the wall at least 15 inches to release. Failure to follow instructions carefully may cause damage. Save instructions or visit command.com.
Product Details
Holds 5 lb (2.2 kg). Damage-free hanging. Holds strongly. Removes cleanly. Limited Warranty and Limitation of Liability (for product sold in USA): This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. command.com Hooks can be reused with Command Large Refill Strips. Hooks made in Mexico. Strips made in USA.Nutrition Facts
Warnings
Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15 degrees - 125 degrees F.Manufacturer
3M
3M Center ST. Paul, MN 55144-1000
UPC
00051131921290