Diamond Crystal Jiffy Melt Ice Melter
On This Page
Directions
Directions for use: Remove slush and as much loose snow as possible before ice melter application. Spread Jiffy melt evenly across surface area. Apply 1/2 - 1 1/2 cups per square yard, depending on ice thickness and air temperature, as needed. Reapply as necessary. When ice and snow soften, remove slush and any excess ice melter from pavement for good concrete maintenance. Storage information: Diamond Crystal Jiffy Melt ice melter contains magnesium chloride, which is hygroscopic, thus easily pulls moisture from the air. Special valved bag extends storage life. Close and reseal container tightly to keep product dry, or place in a moisture-proof container. Store in a cool dry place. Always store ice melters out of reach of children and pets. 1. Remove excess slush and snow. 2. Apply 1/2 to 1 1/2 cups of Jiffy Melts® per square yard. 3. After melted remove slush and excess ice melter.
Description
Diamond Crystal® Fast Acting Jiffy Melt® Ice Melter. Faster Melting Starts Here™. See www.diamondcrystalsalt.com for more ice melter information.Other Description
Blended ice melter with magnesium chloride and sodium chloride. High capacity, fast action blend. Melts ice down to -10 degrees F when used as directed. Contains: Salt (sodium chloride) CAS No. 7647-14-5. Magnesium chloride hexahydrate CAS No. 7791-18-6. For MSDS, stain test results and other information, consult the FAQ section at www.diamondcrystalsalt.com, or contact us at 1-800-428-4244. Processed and packaged in the USA. Valved bag for product protection! Upromise. Safe for college. Join free. Upromise.com. Exopack. Thomasville, NC,Warnings
Caution: Use as directed.Precautions and best practices: Diamond Crystal Jiffy Melt is not intended for human or animal consumption. If ingested, drink water. If discomfort occurs or persists, contact your doctor or veterinarian.
Diamond Crystal® Jiffy Melt® blended ice melter may be used to remove snow and ice from concrete sidewalks, parking lots and asphalt surfaces. However, all ice-melting agents work by reducing the freezing point of water. This may result in more frequent freeze-thaw cycling of the melted snow and ice, which can cause surface scaling of concrete. As such, use only on properly placed, cured and sealed, air-entrained concrete. To lessen the possibility of freeze-thaw cycling and potential damage, promptly remove slush as it is formed. Do not use on porous or improperly cured concrete, concrete less than one year old, precast concrete items, masonry, mortar, wood or other porous materials. As with any ice-melting agent, particular care should be used when grass and vegetation are adjacent to the deicing surface as excess application may cause damage.
Consumer used this product at his/her own risk.
UPC
00013600031114