Anti Skid Ice Melt
On This Page
Directions
Applications and uses: Temperature: 32 to 20 degrees. Application rate: 1/2 lb per 30 square feet. Stabilizes surface: immediately. Approx melting time: 15 minutes. Sustained melting: 2 hours. Temperature: Below 20 degrees. Application rate: 1 lb per 30 square feet. Stabilizes surface: immediately. Approx melting time: 20 minutes. Sustained melting: 2 hours. Temperature: Below 10 degrees. Application rate: 1 lb per 30 square feet. Stabilizes surface: immediately. Approx melting time: reduced melting. Sustained melting: reduced melting. Sweep leftover Anti-SSSSKid® into your lawn. It will sweeten your soil and provide additional nitrogen for healthier growth. Use Anti-SSSSKid® when icy conditions prohibit the normal mobility of pedestrian and vehicular traffic. Stabilizes icy conditions on contact and continues working long after other ice melts have stopped.
Description
Anti Skid® Ice Melt. Environmentally friendly ice melt. Contains no salt. Pet friendly. For traction & melting. Winter traction & safe melting at low temperature.Other Description
Continues working long after other melting agents have stopped. Anti-SSSSKid® is a biodegradable environmentally friendly ice melt, offering immediate traction and safe melting without the damaging effects caused by salt or chloride based products. Upon application the limestone chips provide immediate traction, stabilizing icy conditions on contact and maintaining it throughout the melting process. If re-freezing should occur, the tiny limestone chips are trapped in the ice, providing stability to the surface, so that it remains negotiable for pedestrian and vehicular traffic. Unlike salt and chloride based products, Anti-SSSSKid® is pet friendly and non corrosive, so it's safe to use on drives, walks and around your trees and shrubs. Anti-SSSSKid® run off provides added nitrogen to your soil, a nutrient all forms of plant life need for healthier growth. Only Anti-SSSSKid® provides both traction and safe melting, without the residual damage associated with salt and chloride products. Note: in poor drainage areas, Anti-SSSSKid® build up may cause some vegetation burn out. Warranty: the manufacturer warrants that the product conforms to the chemical description and is reasonably fit for the purpose stated on the label, when used in accordance with the directions under normal conditions of use, but neither the warranty nor any other warranty of merchantability or fitness for a particular purpose is expressed or implied to the use of this product, contrary to label instructions, not reasonable to manufacturer, and buyer assumes the risk of any such use. Contents: limestone & urea.Warnings
Caution: freshly poured concrete that is properly air entrained should cure for 240 days before applying Anti-SSSSKid®. Anti-SSSSKid® will not harm good quality, exterior concrete. Note: industry standards require it at properly placed exterior concrete (4000 PSI) should contain not less than 564 lbs. of cement per cubic yard, with a water cement ratio of not more than .45 by weight and containing 6% air entrainment. No ice melt product should be used on concentrate with exposed aggregate.Caution irritant: this product is intended to be used as a skid resistant and melting agent for ice and snow. This product is not intended for human or animal consumption. Inhaling nuisance dust from this or any other product may cause or aggravate respiratory ailments. In case of skin contact, wash area thoroughly with water. Material safety data sheets are available upon request.
UPC
00013873201207