Permatex Gasket Maker, Red, RTV Silicone
80 ml
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Cut nozzle and apply a continuous 2 to 6 mm (1/16 inch to 1/4 inch) bead of silicone to one surface, surrounding all bold holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline.
Product Details
High temperature applications. Temperatures up to 343 degrees C (650 degrees F). Meets OEM specs. Red high-temp gasket maker is formulated to handle heavy duty applications and extreme temperatures up to 343 degrees C (650 degrees F) intermittent. Meets USA Mil-A-46106B. For high-temp applications. Gasketing grade. Sensor safe. Temp Range: -54 degrees C to 316 degrees C (-65 degrees F to 600 degrees F) continuous, 343 degrees C (650 degrees F) intermittent. Resists oils and powertrain fluids. Indoor/outdoor sealant. Remains flexible. Applications: Valve covers, oil pans, water pumps, thermostat housings, transmission pans, firewall openings, heater boxes, metal, plastic, rubber and glass. www.permatex.com. Assembled in U.S.A. with U.S. global materials.Nutrition Facts
Warnings
Caution: Irritant.,Caution: May irritate eyes. May irritate skin. Do not get in eyes. Do not get on skin or clothing. Do not breath fumes. Keep out of reach of children.,First Aid Treatment: Contains polydimethylsiloxane, petroleum distillate. If swallowed, call a poison control centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.Manufacturer
Illinois Tool Works Inc.
Oakville, ON
UPC
00068161594035