Permatex Gasket Maker, RTV Silicone, Red
300 ml
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Cut nozzle and apply a continuous 2 to 6 mm (1/16 inch to 1/14 inch) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use.
Product Details
High temperature applications. Gasket maker and sealant. Temperatures up to 343 degrees C (650 degrees F). Sensor safe. Meets OEM specs. Spec no. 26C. Red High-temp Red Gasket Maker is formulated to handle heavy duty applications and extreme temperatures up to 343 degrees C (650 degrees F) intermittent. For high-temp applications. Gasketing grade. Sensor safe. Temp range: -54 degrees C to 316 degrees C (-65 degrees F to 600 degrees F) continuous, 343 degrees C (850 degrees F) intermittent. Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans, firewall openings, heater boxes, metal, plastic, rubber, and glass. Meets USA Mil-A-46106B. www.permatex.com. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Caution: Irritant.,Caution: May irritate eyes. May irritate skin. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children.,First Aid Treatment: Contains polydimethylsiloxane, petroleum distillate. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.,Note: Not recommended for use on head gaskets or parts in contact with gasoline.Manufacturer
ITW Global Brands
Oakville, ON
UPC
00068161594134