Permatex Ultra Copper Gasket Maker
80 ml
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. Cut nozzle and apply a continuous 2 to 6 mm (1/16 inch to 1/4 inch) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use.
Product Details
Ideal for high temperature parts. -54 degrees C to 371 degrees C (-65 degrees F to 700 degrees F) intermittent. Sensor safe RTV silicone. Meets OEM specs. Spec 101br. Ultra Copper Gasket Maker maintains seal integrity in the highest temperature applications up to 371 degrees C (700 degrees F) intermittent. High performance. Sensor safe. Non-corrosive. Temp Range: -54 degrees C to 316 degrees C (-65 degrees F to 600 degrees F) Continuous, 371 degrees C (700 degrees F) intermittent. Superior oil resistance. OEM specified. Excellent adhesion. Applications: Exhaust manifolds/headers, turbochargers, valve covers, oil pans, timing covers, water pumps, thermostat housings. www.permatex.ca. Assembled in U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Caution: Irritant.,Caution: May irritate eyes. May irritate skin. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children.,First Aid Treatment: Contains polydimethylsiloxane, calcium carbonate. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.,Note: Not recommended for use on head gaskets or parts in contact with gasoline.Manufacturer
ITW Global Brands
Oakville, ON
UPC
00068161597036