Permatex Ultra Black Gasket Maker
80 ml
On This Page
Directions
Directions: 1. For best results, surfaces should be clean and dry. 2. Cut nozzle and apply a continuous 2 to 6 mm (1/16 inch to 1/4 inch) bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. 3. Let dry for one hour then tighten to torque specifications. 4. Allow 24 hours to fully cure before filling with fluids or returning to service. 5. Replace cap after use.
Product Details
High flexibility & oil resistance. Ideal for stamped metal parts. Sensor safe RTV silicone. Meets OEM specs. Ultra Black gasket maker retains high flexibility while remaining resistant to oils and powertrain fluids. High flexibility. Sensor safe. Non-corrosive. Temp range: -54 degrees C to 204 degrees C (-65 degrees F to 400 degrees F) continuous, 260 degrees C (500 degrees F) intermittent. Superior oil resistance. OEM specified. Excellent adhesion. Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings. www.permatex.ca. Assembled In U.S.A. with U.S. and global materials.Nutrition Facts
Warnings
Caution: Irritant.,Caution: May irritate eyes. May irritate skin. Do not get in eyes. Do not get on skin or clothing. Do not breathe fumes. Keep out of reach of children.,First Aid Treatment: Contains polydimethylsiloxane, calcium carbonate. If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.,Note: Not recommended for use on head gaskets or parts in contact with gasoline.Manufacturer
ITW Global Brands
Oakville, ON
UPC
00068161598033