Permatex Adhesive, Rearview Mirror, High Strength, Repair
1 package
On This Page
Directions
Important: Read instructions carefully. Not recommended for use on plastic buttons. Repairs are recommended for use on plastic buttons. Repairs are recommend when temperature are between 10 degrees C to 24 degrees C (50 degrees F to 75 degrees F). 1. Remove mounting button from mirror bracket. 2. Mark outside of windshield with crayon to identify the old location of mirror button. 3. Thoroughly scrape windshield glass and button to remove all old adhesive. 4. Open cleaner/activator towelette by pulling both sides of protective packet at the point at top of package. Fold packet back to use. Towelette is attached to packet. 5. Clean marked area on inside of windshield with cleaner/activator towelette. Allow to dry for 2 minutes or until completely dry. Do not touch windshield after priming. 6. Remove twist off cap then cut off adhesive tip. Apply one drop to the centre of the button. 7. Immediately apply the button to the windshield, ensuring that the correct side is facing up, and hold firmly in place for 1 minute. Allow to set for 30 minutes. Mount mirror to button. Note: If button is mounted incorrectly, bond another button above or next to (but not below) the original one. Heating adhesive and trying to force removal are not recommended.
Product Details
Permanently bonds metal rearview mirror button to windshield. OEM Specified Formula: Ford TA-17-A, chrysler 050153983AA, GM 89021329, AC Delco 89080893. OEM Specified. www.permatex.ca. Made in U.S.A.Nutrition Facts
Warnings
Caution: Contains products that may be harmful. Read warnings on back of card.,Adhesive: Caution: Irritant. May irritate eyes. May irritate skin. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children.,First Aid Treatment: Contains isopropanol, copper compounds. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.,Activator: Danger: Flammable. Contents may catch fire. May irritate eyes. May irritate skin. Do not smoke. Use only in a well-ventilated area. Keep away from flames, such as a pilot light, and any object that sparks, such as an electric motor. Do not get in eyes. Do not get on skin or clothing. Keep out of reach of children.Manufacturer
ITW Permatex
Halton Hills, ON
UPC
00068161903547