UDP Washing Machine Hose, Color Coded, 4 Feet
1 hose
On This Page
Directions
Use with hot and cold water lines 3/4 inches female x female fittings washers included. Installation instructions: 1. Turn off water supply. 2. Remove old hose. Use bucket to contain water. 3. Install new hose using supplied washers. Make sure that washers are seated properly in coupling ends. Be sure to connect the hose to the correct hot/cold side. Begin by hand tightening the connections and then use pliers to secure the ends. Use caution to prevent over-tightening. 4. Turn water supply on and check for leaks. Re-tighten as necessary.
Product Details
3/8 inch x 4 ft. Premium grade high pressure reinforced rubber. One red / one blue. www.upproducts.com. Made in USA.Nutrition Facts
Warnings
For California Residents: Cancer and reproductive harm - www.P65Warnings.ca.gov.,Caution: Inspect hose regularly. Replace if cracked or leaking. Do not use if there are sharp bends or kinks. Never pull or stretch hose. Replace hose within 5 years or sooner if needed.Manufacturer
Ultra Dynamic Products
Elk Grove Village, IL USA
UPC
00708289620901