Krylon Colormaxx Paint + Primer, Satin Hunter Green

12 oz (340 g)


 

Directions

Use On: Indoor and outdoor on wood, metal, most plastics, wicker, glass, ceramic, masonry, paper and fabric. Painting: Shake can 1 to 2 minutes and during use. Test spray in an inconspicuous area for compatibility. Hold can 8 inches to 10 inches from surface. Spray in sweeping motion, side-to side, with slight overlap. Surfaces can be sprayed at any angle. Apply multiple thin coats. Wait 1 minute between each coat. Dry & Application Times: Dries in 10 minutes or less. Handle in 1 hour. Apply additional coats within 2 hours or after 48 hours. After Use: To clean paint on tip, wear eye protection and wipe off with mineral spirits - do not stick pin in tip opening. Clean oversparay with mineral spirits, following manufacturer's instructions. Recycle empty can and cap per local regulations. Contact us: 1-800-247-3268 or ask(at)krylon.com.

 

Product Details

No runs, no drips, no errors. Indoor, out door. Easy push, spray any way. Satin hunter green. Dries in 10 minutes or less. Prevents rust. For metal, wood, plastic and more. Cap and can indicate color: Colormaxx Paint + Primer provides rust protection, ultimate coverage, durable adhesion, and fast dry time 10 minutes or less. Satisfaction Guarantee: If dissatisfied, contact us with product number and batch code on bottom of can for full purchase price refund. www.krylon.com. Contact Us: 1-800-247-3268 or ask(at)krylon.com. Please recycle when empty. Recycling facilities for tis product may not exist in your area. Made in the USA with global materials.

Nutrition Facts

Warnings

First Aid: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. Delayed effects from ling term over exposure. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.,Danger! Extremely flammable vapors may cause flash fires! Contents under pressure. Vapor harmful. Irritates eyes, skin and respiratory tract. See other cautions on back panel. Preparation Warning: If you scrape, sand or remove old paint, you may release lead dust. Lead is toxic. Contact the National Lead Information hot line at 1-800-424-Lead or log on to www.epa.gov/lead. Sand shiny surfaces. Surfaces should be clean, dull and dry. Remove loose rust and paint with a wire brush or sand paper. For additional protection, a separate coat of primer can be applied especially on bare wood and metal. Cautions contains ketones, aliphatic hydrocarbons and acetates. Danger! Extremely flammable. Keep away from heat, sparks, and open flame. Vapors will accumulate readily and may ignite explosively. Keep area ventilated during use and until all vapors are gone. Do not smoke - extinguish all flames, pilot lights and heaters - turn off stoves, electric tools and appliances, and any other sources of ignition. Contents under pressure. Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120 degrees F. Keep upright in a cool, dry place. Do not discard empty, can in trash compactor. Vapor Harmful. Use with adequate ventilation. Avoid continuous breathing of vapor and spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Do not take internally. Keep out of reach of children. Danger: Rags, steel wool, other waste soaked with this product, and sanding residue may sponteneously catch fire if improperly discarded. Immediately place rags, steel woll, other waste soaked with this product, and santing residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations.

Manufacturer

Krylon Products Group
Cleveland, OH 44115

UPC

00724504055631