Krylon Neon, Pink
12 oz (340 g)
On This Page
Directions
For boldest neon color, use a white base coat; glows under ultraviolet (black) light. For Use On: Wood, metal, glass and paper. Painting Conditions: Spray outdoors or in a well-ventilated area. Protect surrounding areas. Best results when temperature is 55 degrees F (12 degrees C) to 75 degrees F (24 degrees C) and humidity is below 60%. Note: Applying outside of this range may impact finish. Painting: Shake until ball inside begins to rattle, then shake from an additional 2 minutes. Hold can 10 in - 12 in from surface, spray in sweeping motion, from side-to-side with slight overlap. Apply multiple thin coats to avoid runs & drips. Dry & Application: Dries to touch in 15 minutes or less. Handle after 2 hours. Apply additional coats within 2 hours or after 48 hours. After Use: If spray button becomes clogged, wear eye protection, wipe off the button opening with lacquer thinner - do not stick pin in spray button opening. Clean overspray excess paint, tools and other accessories with a regionally compliant cleaner following manufacturer's safety instructions. Wash hands after using. Dispose of in accordance with local, state and federal regulations.
Product Details
For boldest fluorescent color, use white base coat. DIY series. Design. It. Yourself. Indoor. Outdoor. Fast drying. Glows under UV black light. Satisfaction Guaranteed: If dissatisfied contact us with product number and batch code on bottom of can for full purchase price refund. www.krylon.com. Contact Us: 1-800-247-3268 or ask(at)krylon.com. Please recycle when empty. Recycling facilities for this product may not exist in your area. Made in the USA with global materials.Nutrition Facts
Warnings
First Aid: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. Delayed Effects from long term overexposure. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal.,Danger! Extremely flammable - vapors may cause flash fires! Contents under pressure. Vapor harmful. Irritates eyes, skin and respiratory tract. Before using, carefully read cautions on back panel. Preparation: Warning! If you scrape, sand or remove old paint, you may release lead dust. Lead is toxic. Contact the National Lead Information hotline at 1-800-424-Lead or log onto www.epa.gov/lead. Surface should be clean, dull and dry. Remove loose paint rust, dirt, grease and oil. To improve adhesion, sand glossy or rough surfaces until smooth. Cautions contains propane, butane, L.T. aliphatic carbon solvent, ethylbenzene, xylene, acetone, ethyl 3-ethoxypropionate N-butyl acetate. Danger! Extremely flammable. Keep away from heat, sparks and open flame. Vapors will accumulate readily and may ignite explosively. Keep area ventilated during use and until all vapors are gone. Do not smoke - extinguish all flames, pilot lights and heaters - Turn off stoves, electric tools and appliances and any other sources of ignition. Contents under pressure. Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120 degrees F. Keep upright in a cool, dry place. Do not discard empty can in trash compactor. Vapor Harmful: Use with adequate ventilation. Avoid continuous breathing of vapor and spray mist. To avoid breathing vapors or spray mist, open windows and doors, or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Do not take internally. Keep out of reach of children. Conforms to ASTM D-4236. Contact a physician for more health information. Danger: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations.Manufacturer
Krylon Products Group
Cleveland, OH 44115
UPC
00724504081906