Krylon Paint, Chalky Finish, Green Brook
12 oz (340 g)
On This Page
Directions
Use On: Wood, metal, plastic, laminate, wicker, ceramic, glass and more. Coverage: 25 sq ft. Painting Conditions: Spray outdoors or in a well ventilated area. Protecting surrounding areas. Best results when air and surface temperatures are 50 degrees F (10 degrees C) to 85 degrees F (29 degrees C) and humidity is at 85%. Preparation: Warning! If you scrape, sand or remove old paint, you may release lead dust. Lead is toxic. Contact the National Lead Information Hotline at 1-800-424-Lead or log on to www.epa.gov/lead. Sand shiny surfaces. Surfaces should be clean, dull and dry. Remove loose rust and paint with a wire brush or sand paper. For additional protection, a separate coat of primer can be applied especially on bare wood and metal. Painting: Shake can 1 to 2 minutes and during use. Test spray in an inconspicuous are for compatibility. Hold can 6 in to 8 in from surface, spray in a sweeping motion, side-to-side, with slight overlap. Apply multiple thin coats. Dry & Application Times: Dries in 20 to 25 minutes. Handle in 1 hour. Apply additional coats within 6 hours or after 24 hours. After Use: Clean valve by holding can upside down and spraying until clear gas comes out. If spray button becomes clogged, wear eye protection, wipe off the button opening with a regionally compliant cleaner, following manufacturer's safety instructions - do not stick pin in spray button opening. Wash hands after using. Dispose of in accordance with local, state and federal regulations.
Product Details
DIY series. Design-it-yourself. Ultra matte finish. Fast drying. Indoor. Outdoor. Cap and can indicate color. Krylon Chalky Finish Paint creates a smooth, matte finish to transform your projects. Leave chalky finish or distress to create a unique look. ASTM D- 4236 Conforms to the health requirment of. www.krylon.com. Please recycle when empty. Recycling facilities for this product may not exist in your area. Made in USA with global materials.Nutrition Facts
Warnings
First Aid: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. Delayed effects from long term overexposure. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. Do not take internally. Keep out of reach of children. Dangers: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations.,Danger! Extremely flammable - vapors may cause flash fires! Contents under pressure. Vapor harmful. Irritates eyes, skin and respiratory tract. See other cautions on back panel. Caution: Contains acetone, propane, n-butyl acetate, butane, 2-propoxyethanol, titanium dioxide, cobalt 2-ethylhexanoate. Danger! Extremely flammable. Keep away from heat, sparks, and open flame. Vapors will accumulate readily and may ignite explosively. Keep are ventilated during use and until all vapors are gone. Do not smoke - extinguish all flames, pilot lights and heaters - turn off stoves, electric tools and appliances, and any other sources of ignition. Contents under pressure. Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120 degrees F. Keep upright in a cool, dry place. Do not discard empty can in trash compactor. Vapor harmful. Use with adequate ventilation. Avoid continuous breathing of vapor and spray mist. To avoid breathing vapors or spray mist, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using.Manufacturer
Krylon Products Group
Cleveland, OH 44115
UPC
00724504090892